7 firmware upgrade, Firmware upgrade, Ion 7 – Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler User Manual
Page 51: 7firmware upgrade
44
VSM-4x4A
–
Firmware Upgrade
7
Firmware Upgrade
You can upgrade the
VSM-4x4A
via the USB port on the rear panel or via the
Device Settings web pages (see
Section 8.3.2
).
The latest firmware version can be downloaded from the Kramer Web
site a
To upgrade the firmware via the USB port:
1. Click
Save
on the lower part of the screen to
save the device’s current
configurations (see
Section 8.9
).
2. Download the
VSM-4X4A_vx.xx.BIN
firmware and copy it to the root folder
of a memory stick, formatted with FAT32 system.
3. Disconnect the power from the
VSM-4x4A
.
4. Connect the memory stick to the USB port on the rear panel of the
VSM-4x4A
.
5. Power the
VSM-4x4A
.
6. Press
MENU
on the front panel of the device.
7. Select
ADVANCED
>
FIRMWARE
USB UPGRADE
>
ON
.
8. Press
ENTER
.
9. Wait until the device restarts following the upgrade process.
10. Disconnect the memory stick.
11. Perform factory reset.
12. Click
Upload
on the lower part of the screen to load device configurations
saved in step 1 (see
Section 8.9
).
13. Check that the firmware was updated.