Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 102)

VSM-4x4A – VSM-4x4A RS-232/Ethernet Communication Protocol 95
10.3.6.5 NET-DHCP
Functions Permission Transparency
Set: NET-DHCP Administrator -
Get: NET-DHCP? End User Communication
Description Syntax
Set: Set DHCP mode
# NET-DHCP SPP1CR
Get: Get DHCP mode
# NET-DHCP? CR
Response
Set: ~ nn@ NET-DHCP SPP1SPOKCR LF
Get: ~ nn@ NET-DHCP SPmodeCR LF
Parameters
P1 – use static IP: 0 (Static IP) or use DHCP: 1 (DHCP). If DHCP is unavailable, use the IP address set
by the factory or the NET-IP command
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks.
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
command “NAME”. You can also get an assigned IP by direct connection to USB or RS-232 protocol port
if available.
For proper settings consult your network administrator.
K-Config Example
Set the DHCP mode to static:
“#NET - DHCP 0”,0x0D
10.3.6.6 ETH-PORT
Functions Permission Transparency
Set: ETH-PORT Administrator Public
Get:
ETH-PORT?
End User Public
Description Syntax
Set: Set Ethernet port protocol # ETH-PORT SPporttype,ethportCR
Get: Get Ethernet port protocol
# ETH-PORT? SPporttypeCR
Response
Set: ~ nn@ ETH-PORT SPporttype,ethportCR LF
Parameters
porttype – 0 (TCP)
ethport – 1 to 65535
K-Config Example
Set TCP to 2:
“#ETH - PORT 0,2”,0x0D