2 operating the vsm-4x4a in matrix mode, 2 video wall mode, 1 connecting the vsm-4x4a in video wall mode – Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler User Manual
Page 18: Video wall mode, Figure 4: vsm-4x4a video wall operation mode, N 5.2

VSM-4x4A
–
Connecting and Operating the VSM-4x4A
11
5.1.2
Operating the VSM-4x4A in Matrix Mode
To select the inputs via the front panel buttons/IR remote control transmitter:
1. Press
MATRIX MODE
on the front panel to select the Matrix operation
mode.
2. Press
MENU
on the front panel to display the OSD menu (see
Section 6.2
and define the matrix switcher option (seamless or independent).
3. Press an output (A to D) button and then an input button (1 to 4) to switch to
the selected output.
4. If required, press
TAKE
to switch several inputs and outputs at once
(see
Section 6.1.2
).
5.2
Video Wall Mode
In Video Wall mode, you can display the output on a set of four monitors /
projectors / TV sets that are tiled together in a 2x2 or 1x4 setting to form one large
display. Each output shows one quarter of the image as shown in the example in
In Video Wall mode, the audio of the selected input is routed to one of the outputs.
Figure 4: VSM-4x4A
Video Wall Operation Mode
5.2.1
Connecting the VSM-4x4A in Video Wall Mode
To connect the video wall as illustrated in
and
1. Connect the inputs, not shown in