10 configuring osd parameters (osd settings menu) – Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler User Manual
Page 39
32
VSM-4x4A
–
Controlling the VSM-4x4A
6.2.10
Configuring OSD Parameters (OSD SETTINGS Menu)
Mode
Function
POSITION
Set the position of the OSD to LEFT TOP, RIGHT TOP, LEFT
BOTTOM or RIGHT BOTTOM
H OFFSET
Shift the horizontal position of the OSD
V OFFSET
Shift the vertical position of the OSD
VIDEO WALL OSD
Set to Single Output to have the OSD appear on one of the
video wall outputs or set to All Outputs to have the OSD appear
on all four outputs.
TRANSPARENCY
Set the OSD background between 9 (opaque) and 0
(transparent)
IDENT. TIMEOUT
Set the “Identify” label timeout period in seconds or set it to OFF
so it will appear continuously
MENU TIMEOUT
Set the menu timeout period in seconds or set it to OFF so it will
appear continuously
INFO. TIMEOUT
Set the “INFO” display timeout period in seconds or set it to OFF
so it will appear continuously
INFO. DISPLAY
Set the display of information ON or OFF
BRIEF INFO.
Set the display of brief information ON or OFF
VOLUME INFO.
Set the display of volume information ON or OFF
EXIT
Click to exit this menu
6.2.11
Configuring Power Saving Settings (ADVANCED > AUTO SYNC OFF
Menu)
Turn the auto sync off to DISABLE (default), FAST or SLOW. This feature is useful,
for example, when the output is connected to a projector, and the projector
automatically shuts down when it has no input.
Mode
Function
DISABLE
The power save mode is disabled
FAST
Auto sync off is enabled, and the output is de-activated after 10
seconds if no input is present
SLOW
Auto sync off is enabled, and the output is de-activated after 2
minutes if no input is present
6.2.12
Configuring Lock Mode (ADVANCED > LOCK MODE Menu)
Mode
Function
ALL
Lock all the front panel buttons
MENU ONLY
Lock the MENU (and navigation) front panel buttons only
ALL & SAVE
Lock all the front panel buttons
The lock status is saved when the
VSM-4x4A
is powered down
MENU ONLY &
SAVE
Lock the MENU (and navigation) front panel buttons only
The lock status is saved when the
VSM-4x4A
is powered down