6 communication commands, 1 net-mac, 2 net ip – Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler User Manual
Page 100: Ion 10.3.6

VSM-4x4A
–
VSM-4x4A RS-232/Ethernet Communication Protocol
93
10.3.6
Communication Commands
Command
Description
NET-MAC
Get MAC address
NET-IP
Set/get IP address
NET-GATE
Set/get gateway IP
NET-MASK
Set/get subnet mask
NET-DHCP
Set/get DHCP mode
ETH-PORT
Set/get Ethernet port protocol
10.3.6.1
NET-MAC
Functions
Permission
Transparency
Set:
-
-
-
Get:
NET-MAC?
End User
Communication
Description
Syntax
Set:
Get:
Get MAC address
#
NET-MAC?
CR
Response
~
nn@
NET-MAC
SPmac_addressCR LF
Parameters
mac_address
–
Unique MAC address. Format:
XX-XX-XX-XX-XX-XX
where X is hex digit.
K-Config Example
Get the MAC address:
“#NET
-MAC? XX-XX-XX-XX-XX-
XX”,0x0D
10.3.6.2
NET IP
Functions
Permission
Transparency
Set:
NET-IP
Administrator
-
Get:
NET-IP?
End User
Communication
Description
Syntax
Set:
Set device IP address
#
NET-IP
SPP1CR
Get:
Get device IP address
#
NET-IP?
CR
Response
Set: ~
nn@
NET-IP
SPip_addressSPOKCRLF
Get: ~
nn@
NET-IP
SPip_addressCR LF
Parameters
P1
– IP address, in the following format:
xxx.xxx.xxx.xxx
Notes
For proper settings consult your network administrator.
K-Config Example
Set the IP address to 192.168.1.39:
“#NET
-
IP 192.168.001.039”,0x0D