3 dual operation mode, Figure 27: the dual tab, Pop mode – Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler User Manual
Page 58: Figure 28: the dual tab, Pip mode, Ion 8.2.3

VSM-4x4A
–
Using the Embedded Web Pages
51
8.2.3
Dual Operation Mode
Click
Dual
to display the Dual mode window and set
Mode
to one of the following
configurations:
•
POP
– Side-by-side images on the output (Left and Right)
Figure 27: The Dual Tab
– POP Mode
•
PIP
– A PIP image over the main image on the output
Figure 28: The Dual Tab
– PIP Mode
In the DUAL mode you can perform the following operations:
•
Switch an input to an output
– see
Section 8.2.3.1
•
Set the borders of an image to Show, Only Selected or Off
•
Edit the input label (see
Section 8.2.5.1
•
Store and recall a setup (see
Section 8.2.5