IDK MSD-54 Series Command Guide - Manual (Page 62)

MSD-54 Series Users Guide (Command Guide)
62
@SEN Set HDCP output mode
Command
format @SEN, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
Return value
format @SEN, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
hdcp_1-4 : HDCP output
0 = HDCP is output only if input signals are HDCP compliant (HDCP INPUT
ONLY),
1 = HDCP is always output (ALWAYS [Default]),
2 = HDCP is not authorized (DISABLE)
Example Send
Receive
@SEN,1,1
@SEN,1,1
OUT1: Send “ALWAYS”.
Terminated normally.
Related info. 8.7.8 HDCP output mode
@GEN Get HDCP output mode
Command
format @GEN
Return value
format @GEN, out_1 (, out_2, out_3, out_4)
Parameter out_1-4 : HDCP output of each output
0 = HDCP is output only if input signals are HDCP compliant (HDCP INPUT
ONLY),
1 = HDCP is always output (ALWAYS [Default]),
2 = HDCP is not authorized (DISABLE)
Example Send
Receive
@GEN
@GEN,1,1,1,0
Get HDCP output.
OUT4: HDCP is output only if input signals are
HDCP compliant. Other outputs: HDCP is always
output.
Related info. 8.7.8 HDCP output mode