IDK MSD-54 Series Command Guide - Manual (Page 36)

MSD-54 Series Users Guide (Command Guide)
36
@GOM Get output masking
Command
format @GOM, ch
Return value
format @GOM, ch, left, right, top, bottom
Parameter ch : Output
1 = OUT1 to 4 = OUT4
left : Masking of left side
Horizontal input display position (0 or more) to Masking of right side [Default]: 0
right : Masking of right side
Masking of left side to Horizontal input display position+ Horizontal input display
size (Horizontal output resolution or less) [Default]: Horizontal output resolution
top : Masking of top side
Vertical input display position (0 or more) to Masking of bottom side [Default]: 0
bottom : Masking of bottom side
Masking of the top size to Vertical input display position+ Vertical input display
size (Vertical output resolution or less) [Default]: Vertical output resolution
Example Send
Receive
@GOM,1
@GOM,1,0,1920,0,1080
Get output masking of OUT1
Left: 0, Right: 1920, Top: 0, Bottom: 1080
Related info. 8.3.12 Output masking
@OAS Output automatic sizing
Command
format @OAS, ch_1 (, ch_2･･･)
Return value
format @OAS, ch_1 (, ch_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
Example Send
Receive
@OAS,1
@OAS,1
Initialize following settings so that output image from
OUT1 is displayed in the full screen;
@SOP Set output position (P. 34), @SOS Set output
size (P. 34), @SOM Set output masking (P. 35)
Terminated normally.
Related info. 8.3.13 Output automatic sizing