IDK MSD-54 Series Command Guide - Manual (Page 25)

MSD-54 Series Users Guide (Command Guide)
25
@GSV Get video channel
Command format @GSV
Return value
format @GSV, output_1 (, output_2 , output_3 , output_4)
Parameter output_1-4 : Video input channel
0 = OFF [Default], 1 = IN1, 2 = IN2, 3 = IN3, 4 = IN4, 5 = IN5,
6 = IN6, 7 = IN7, 8 = IN8, 9 = IN9
Example Send
Receive
@GSV
@GSV,1,1,2,2
Get status of video input channels.
Input of OUT1 and OUT2: IN1
Input of OUT3 and OUT4: IN2.
Related info. 7.1 Selecting Input Channels
@SSA Switch audio channel
Command format @SSA, input_1, output_1 (, input_2, output_2･･･)
Return value
format @SSA, input_1, output_1 (, input_2, output_2･･･)
Parameter input_1-4 : Audio input connector
0 = OFF [Default], 1 = IN1, 2 = IN2, 3 = IN3, 4 = IN4, 5 = IN5,
6 = IN6, 7 = IN7, 8 = IN8, 9 = IN9
output_1-4 : Audio output connector
0 = All outputs, 1 = OUT1, 2 = OUT2, 3 = OUT3, 4 = OUT4
Example Send
Receive
@SSA,1,1
@SSA,1,1
Select IN1 as input ofOUT1.
Terminated normally.
Related info. 7.1 Selecting Input Channels
@GSA Get audio channel
Command format @GSA
Return value
format @GSA, output_1 (, output_2 , output_3 , output_4)
Parameter output_1-4 : Audio input channel
0 = OFF [Default], 1 = IN1, 2 = IN2, 3 = IN3, 4 = IN4, 5 = IN5,
6 = IN6, 7 = IN7, 8 = IN8, 9 = IN9
Example Send
Receive
@GSA
@GSA,1,1,2,2
Get status of audio input channels.
Input of OUT1 and OUT2: IN1
Input of OUT3 and OUT4: IN2
Related info. 7.1 Selecting Input Channels