IDK MSD-54 Series Command Guide - Manual (Page 126)

MSD-54 Series Users Guide (Command Guide)
126
@SPL Enable/Disable parallel input
Command format @SPL, lock
Return value
format @SPL, lock
Parameter lock :
0 = UNLOCK [Default], 1 = LOCK, 2 = Reverse current setting
Example Send
Receive
@SPL,1
@SPL,1
Lock parallel input.
Terminated normally.
Related info. 8.14.4 Enable/Disable
@GPL Get lock status of parallel input
Command format @GPL
Return value
format @GPL, lock
Parameter lock :
0 = UNLOCK [Default], 1 = LOCK, 2 = Reverse current settings
Example Send
Receive
@GPL
@GPL,1
Get lock state of parallel input.
Keys are locked.
Related info. 8.14.4 Enable/Disable
@SPN Set parallel switching mode
Command format @SPN, sw_mode
Return value
format @SPN, sw_mode
Parameter sw_mode : Parallel switching mode
0 = Video & Audio simultaneously [Default], 1 = Only video, 2 = Only audio
Example Send
Receive
@SPN,0
@SPN,0 Set to Video & Audio simultaneously (V&A).
Terminated normally.
Related info. 8.14.5 Switching mode
@GPN Get parallel switching mode
Command format @GPN
Return value
format @GPN, sw_mode
Parameter sw_mode : Parallel switching mode
0 = Video & Audio simultaneously [Default], 1 = Only video, 2 = Only audio
Example Send
Receive
@GPN
@GPN,0
Get parallel switching mode.
Set to Video & Audio together (V&A).
Related info. 8.14.5 Switching mode