IDK MSD-54 Series Command Guide - Manual (Page 128)

MSD-54 Series Users Guide (Command Guide)
128
@PDE Initialize parallel input feature assignment
Command format @PDE, mode
Return value
format @PDE, mode
Parameter mode : Initialization mode
0 = FACTORY DEFAULT (For factory defaults, see Table 3.3.15c to Table
3.3.15f)
1 = ALL CLEAR (All pins have no assignment after initialization)
2 = Tally->PARALLEL COPY (The same setting as the Tally output
connector)
Example Send
Receive
@PDE,0
@PDE,0
Initialize parallel input functions to factory default.
Terminated normally.
Related info. 8.14.10 Feature initialization