IDK MSD-54 Series Command Guide User Manual

Page 112

MSD-54 Series Users Guide (Command Guide)

112

@GCM

Get video and audio channel setting in cross point memory

Command
format

@GCM, memory

Return value
format

@GCM, memory, video _1, audio_1, (video _2, audio_2, video _3, audio_3, video
_4

, audio_4), name

Parameter

memory

: Cross point memory

1 to 9

video_1-4

: Video output

audio_1-4

: Audio output

-1 = Not control, 0 = OFF, 1 = IN1 to 9 = IN9

Nothing is saved in the memory as factory default, the state is “-1” (Not controlled)..
If you save only video (@SCV) or audio (@SCA) at the first saving of cross point
settings, “-1” (Not control) is replied to unsaved audio and video.

name

: Memory name

Up to 10 characters using 20 to 7D. “2 ASCII codes”

Example Send

Receive

@GCM,2

@GCM,2,3,3,1
,1,2,2,-1,-1,PA
TTERN2

Get video and audio channels of cross point memory
2.
With the name, “PATTERN2”, the following settings
are saved: OUT1: IN3; OUT2: IN1; OUT3: IN2;
OUT4: Not controlled.

Related info.

8.13.3 Editing cross point

@RCV

Load video channel setting from cross point memory