IDK MSD-54 Series Command Guide - Manual (Page 111)

MSD-54 Series Users Guide (Command Guide)
111
@SEM Save video and audio channel setting in cross point memory
Command
format @SEM, memory (, name)
Return value
format @SEM, memory (, name)
Parameter memory : Cross point memory
1 to 9
name : Name of the memory
Up to 10 characters using 20 to 7D. “2 ASCII codes”
If you do not specify memory name, only cross point settings are saved without
changing the memory name.
Example Save the current video and audio channels in cross point memory 2. The settings of
output whose channel control is disabled is not saved.
Send
Receive
@SEM,2
@SEM,2
Not specify memory name
Send
Receive
@SEM,2,PATTERN2
@SEM,2,PATTERN2
Specify memory name
Related info. 8.13.2 Saving cross point
@ECM Edit video and audio channel setting in cross point memory
Command
format @ECM, memory, v_1, a_1 (, v_2, a_2, v_3, a_3, v_4, a_4)
Return value
format @ECM, memory, v_1, a_1 (, v_2, a_2, v_3, a_3, v_4, a_4)
Parameter memory : Cross point memory
1 to 9
v_1-4 : Video output
a_1-4 : Audio output
-1 = Not control, 0 = OFF, 1 = IN1 to 9 = IN9
Example Send
Receive
@ECM,2,1,1,2,2,3,3,-1,-1
@ECM,2,1,1,2,2,3,3,-1,-1
If cross point memory 2 is loaded,
OUT1 to 3 are set IN1 to 3,
respectively, and OUT4 is not
controlled.
Related info. 8.13.3 Editing cross point