IDK MSD-54 Series Command Guide - Manual (Page 67)

MSD-54 Series Users Guide (Command Guide)
67
@GOL Get limit status of audio output level
Command
format @GOL
Return value
format @GOL, out_1 (, out_2, out_3 , out_4)
Parameter out_1-4 : Limit of each audio output level
-1 = Min. set value (-60 dB), 0 = Not limited, 1 = Max. set value (+10 dB)
Example Send
Receive
@GOL
@GOL,1,0,0,0
Get limit of each audio output level
OUT1: Max. value; other outputs: Not limit
Related info. 8.8.1 Output level
@SAM Set output mute
Command
format @SAM, ch_1, mute_1 (, ch_2, mute_2･･･)
Return value
format @SAM, ch_1, mute_1 (, ch_2, mute_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
mute_1-4 : Audio output mute
0 = OFF [Default], 1 = ON
Example Send
Receive
@SAM,1,1
@SAM,1,1
Mute audio output of OUT1.
Terminated normally.
Related info. 8.8.2 Output mute
@GAM Get output mute
Command
format @GAM
Return value
format @GAM, out_1 (, out_2, out_3, out_4 )
Parameter out_1-4 : Audio output mute of each output
0 = OFF [Default], 1 = ON
Example Send
Receive
@GAM
@GAM,1,0,0,0
Get audio output mute.
OUT1: Mute ON; other outputs: Mute OFF
Related info. 8.8.2 Output mute
@SAS Select audio input
Command
format @SAS, ch_1, select_1 (, ch_2, select_2･･･)
Return value
format @SAS, ch_1, select_1 (, ch_2, select_2･･･)
Parameter ch_1-5 : Input channel
0 = All digital inputs, 1 = IN1 to 5 = IN5
select_1-5 : Select audio input
0 = Automatic [Default], 1 = Analog audio, 2 = Digital audio
Example Send
Receive
@SAS,3,1
@SAS,3,1
Set audio input of IN3 to analog audio.
Terminated normally.
Related info. 8.8.3 Input selection