IDK MSD-54 Series Command Guide - Manual (Page 19)

MSD-54 Series Users Guide (Command Guide)
19
Serial port
Command Feature
@SCT
Set COM port communication
@GCT Get COM port communication
@SCF Set COM port operation
@GCF Get COM port operation
LAN
port
Command Feature
@SIP
Set IP address
@GIP Get IP address
@SSB Set subnet mask
@GSB Get subnet mask
@SGW Set gateway address
@GGW Get gateway address
@SLF Set LAN operation mode
@GLF Get LAN operation mode
@SLP Set TCP port number
@GLP Get TCP port number
@GMC Get MAC address
Control
commands
Command Feature
@EXC
Execute control commands
@SEC Set control command (Control communication command)
@GEC Get control command (Control communication command)
@SEC Set control command (Display received data)
@GEC Get control command (Display received data)
@SEC Set control command (Control Tally output)
@GEC Get control command (Control Tally output)
@SEC Set control command (Control CEC)
@GEC Get control command (Control communication command)
@SRC Set reply command
@GRC Get reply command
@SCC Set command link
@GCC Get command link
@STG Set toggle operation
@GTG Get toggle operationGet toggle
@SUP Set execution plane at starting up
@GUP Get execution plane at starting up
@SIT Set ineffective time during control command
@GIT Get ineffective time during control command
@DEC Initialize registered command and association
@STL Set command key lighting
@GTL Get command key lighting
@STF Set flash time (Command keys and DISPLAY POWER keys)
@GTF Get flash time (Command keys and DISPLAY POWER keys)