7 to select an cms server id in 485 cms mode, To select a cms server, Id in 485 cms mode – AVer CMS User Manual
Page 93
86
4.1.1.7
To Select an CMS server ID in 485 CMS mode
When System Controller connect with CMS servers through the RS485 port, user needs to select the
CMS server by ID number that user has setup on CMS system.
To make sure the control mode, please press
button and select
. User should see the
current mo
de show as “Mode: 485-CMS Mode”.
To Select an CMS server:
1.
Press
button on System Controller panel.
2.
The LCD screen panel will display the CMS server ID select screen as following shown:
3.
Using the number keys on the System Controller panel to enter the CMS server ID that user
wants to control. And then, press the Enter button.
4.
Now, the System Controller has switched the control to the ID 1 CMS server.