AVer CMS User Manual
Page 141
134
i
CMS only supports two monitor set for recording.
11. After the Monitor set has been created, select the DVR server. And then the cameras of the DVR
server will display on the Camera Select window. User can combines different cameras from
different DVR servers as a monitor set. And all cameras can be selected by different Monitor set
repeat.
12. User can depend on the monitor size to select the screen type
– 4:3 (regular screen monitor) or
16:10 (wide screen monitor). The 4:3 and 16:10 screen type support different monitor layout.
13. Select the camera that user wants to add, and then click Add button. The selected camera will
be added to Monitor Layout window. User can add up to 64 cameras in 4:3 screen type and 80
cameras in 16:10 screen type. To remove the camera from the Monitor Layout window, select
the camera and click Delete button. To delete all cameras, click Clear All button. User can enter
a description for a channel.
i
User can drag the camera channel to Monitor Layout window without using Add button.
14. In monitor set, each camera can be configured the name, transmitting type, and frame rate.
Select the camera in monitor layout window and click Detail button of Camera Setting. And then,
enter the name for the camera and select display position (Left-bottom or Right-bottom) of the
camera name on monitor screen; click
to change the font.
15. Select the transmitting type by click the radio button
– By Fps, Only Key Frame, or Motion. And
then, set the frame rate of the camera in Default Frame Rate column. The value of frame rate
will both apply to live video and recording.
16. Also, user can select the Video Quality
– High, Medium, Low, or Auto. Mark the Enable live
displayer for most optimization can improve the live video frame rate of the IP camera (jpeg
megapixel) when viewing the multiple channels.