3 live playback the recorded video – AVer CMS User Manual
Page 30
23
3.3.3
Live Playback the Recorded Video
User can playback recorded video immediately while monitoring from the local CMS server if the
recording is enabled.
i
- Playback function must be enabled. Please go to Setup > Camera and select the
monitor set and enable the playback function ( see also
- Playback doesn’t support on EB series.
1.
In Monitor mode, click the preview icon of channel and the channel will start live playback.
i
-
The
icon indicates the channel is in live playback mode.
-
Move the mouse course to the bottom of screen, live playback control bar will show
up.
2.
User can use the live playback control button to operate the playback.
i
-
Click channel to switch to full screen mode for operating live playback control button
easily.
-
Only supports 4 channel live playback at the same time.