AVer CMS - Manual (Page 160)

153
4.7.1.3 To Setup the Alarm Sound Setting
1. Next to the Play Warning Sound check box, click Detail.
2. In the Alarm Sound Setting dialog box, click to select other wav file from other source or folder,
Play to listen, Record to make a new copy of a sound.
3. Select the Play Mode.
 Interrupt: when receive the new alarm warming, immediately play new warming sound.
 Play by sequence: when receive the new alarm warming, play after the on playing alarm
warming.
4. If you click Record, you will be prompted if you want to replace the file. Click OK to continue and
Cancel to discontinue.
5. When the Sound Recorder appears, use the record control panel to record, stop, play, rewind and
forward. If you want to keep the existing file, click File > Save As…, enter filename and click Save.
Make sure you have microphone connected to your PC.
6. Click OK to exit and accept the setting and Cancel to exit without saving the setting.
4.7.1.4 Launch program
To call up the external program that is provided by a 3rd party. Click Detail and click to locate the
program path. Enable the Multiple instance check box if the external application has been
programmed to execute repeatedly.