AVer CMS - Manual (Page 159)

152
4.7.1.2 To Setup the Send E-Mail Setting
Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exit and
save the setting and Cancel to exit without saving the setting.
(1)Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable the
Authentication check box and enter User ID and Password.
(2)Mail
To check if it is working, click the Test Account button.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).
Subject: Enter the message title.
Message: Type the message.
(3)Email Notice Setting
In the Notice Interval text box, set the period of time before it sends another e-mail notice.
(4)Modem Dial up Setting
If you are using dial up modem, enable Auto Dial up check box and select the modem name. You may
also set the time to disconnect automatically, just enable the Auto Disconnect after check box and set
the time.