AVer CMS User Manual
Page 86
79
8.
After CMS server and System Controller have well connected, user needs to do the
configuration for CMS server and System Controller to recognize each other. Please follow the
below steps to configure the CMS server and System Controller.
CMS Server site
a. Click Setup button on CMS program UI and select System.
b. In System setting window, click Setting button of the System Controller.
c. In System Controller Setting window, Mark Enable check box to enable the System
Controller functions. And then, select the System Controller Pro 485 as the Model
from drop-down list and select the Port that use to connect with System Controller.
Finally, set an ID for CMS server that is allowing System Controller to match to the CMS
server. Click OK to complete the setting.
System Controller site
1. In main menu, press
and select
(system controller setting).