AVer CMS - Manual (Page 81)

74
4.1.1.2 Installation of System Controller
Connecting the CMS Server through the USB port
The following is an example of System controller installation.
1. The CMS server should be power on and CMS program is executed.
2. Plug the power cord of the System Controller into power outlet.
3. And then, plug the USB cable that is attached on the System Controller to the USB port of the
CMS server.
4. After CMS server and System Controller have well connected, user needs to do the configuration
for CMS server and System Controller to recognize each other. Please follow the below steps to
configure the CMS server and System Controller.

CMS Server site
a. Click Setup button on CMS program UI and select System.
b. In System setting window, click Setting button of the System Controller.