BNC 7000 Series User Manual - Manual (Page 5)

5
1 Introduction to the SERIES 7000
Your SERIES 7000 kit contains the following items:
• SERIES 7000 mainframe
• Universal power adaptor (AC 100 – 240V)
• Ethernet Cable
• SERIES 7000 software CD
It is strongly recommended to use the original power adaptor (as supplied with the device) to
guarantee save and reliable operation of the SERIES 7000.
1.1 General Features and Functions
The different SERIES 7000 models offer different measurement capabilities as shown in the table
below:
Model SERIES 7000 MODEL 7070 SERIES 7000 MODEL 7300
RF frequency 5 MHz to 400
MHz (IS400) / 6
GHz (IS)
5 MHz to 7 GHz 5 MHz to 26 GHz 5 MHz to 26 GHz
Offset range 0.1 Hz to 1 MHz 0.1 Hz to 50 MHz 0.1 Hz to 1 MHz 0.1 Hz to 50 MHz
Absolute Phase
Noise Mode
Y Y Y Y
Additive Phase
Noise Mode
Y Y Y Y
Amplitude Noise
Mode
Y N N N
FFT Analyzer
Mode
Y Y Y Y
Transient
Measurement
Mode
N Y N Y
Features of all models include
• Long-term support: software upgrades (firmware and PC based) are available to download
from www.BerkeleyNucleonics.com. You can also call our technical specialists for support.
You can continue to use both of these services free of charge for the lifetime of the product.
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com