BNC 7000 Series User Manual - Manual (Page 46)

46
4 System Calibration (Firmware 1.0 and up)
User calibration is a function to correct the frequency response using correction data set for phase
noise, amplitude and baseband noise measurements.
This chapter describes the correction method and how to set up the calibration procedure.
User calibration procedure will be supported from firmware and remote
client revision 1.0
Please contact support@Berkeley Nucleonics.com to check availability.
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com