Hanging cable requirements – Hawk Industries Hawkjaw Sr. Manual 100K-2GSR Serial Numbers 101 to 120 User Manual

Page 10

Text mode
Original mode

1. 5/8" diameter steel cable.
2. Appropriate hanging cable hardware

for 5/8" diameter steel cable.

3. Enough cable length to suspend the

Hanger Eye (HE) 20' ft. above the rig
floor.

4. Enough cable length to allow the

HawkJaw to rest on the rig floor 3'- 5' ft.
away from the rotary table with the lift
cylinder completely stroked out. The lift
cylinder is 13' ft. long when completely
stroked out.

Hanging Cable Requirements

Installation