HP CM3530 User Manual
Page 96
Manually configure IPv6 TCP/IP parameters from the control panel
In addition to using the embedded Web server, you can also use the control-panel menus to set an IPv6
address.
1.
At the product control panel, touch the down arrow until the
Administration
menu displays.
2.
Touch the
Administration
menu to open it.
3.
Touch the down arrow until the
Initial Setup
menu displays.
4.
Touch the
Initial Setup
menu to open it.
5.
Touch the
Networking and I/O
menu to open it.
6.
Touch the
Embedded Jetdirect
menu to open it.
7.
Touch the
TCP/IP
menu to open it.
8.
Touch the
IPV6 Settings
menu to open it.
9.
Touch the
Address
menu to open it.
10.
Touch the
Manual Settings
menu to open it.
11.
Touch the
Enable
option.
12.
Touch the
On
setting, and then touch the
Save
button.
13.
Touch the
Address
option, and then touch the
Address
button.
14.
Use the touchscreen to enter the address, and then touch the
Save
button
82
Chapter 5 Connectivity
ENWW