HP CM3530 User Manual
Page 95
Manually configure IPv4 TCP/IP parameters from the control panel
In addition to using the embedded Web server, you can also use the control-panel menus to set an IPv4
address, subnet mask, and default gateway.
1.
At the product control panel, touch the down arrow until the
Administration
menu displays.
2.
Touch the
Administration
menu to open it.
3.
Touch the down arrow until the
Initial Setup
menu displays.
4.
Touch the
Initial Setup
menu to open it.
5.
Touch the
Networking and I/O
menu to open it.
6.
Touch the
Embedded Jetdirect
menu to open it.
7.
Touch the
TCP/IP
menu to open it.
8.
Touch the
IPV4 Settings
menu to open it.
9.
Touch the
Manual Settings
menu to open it.
10.
Touch the
IP Address
option, and then touch the
IP Address
button.
-or-
Touch the
Subnet Mask
option, and then touch the
Subnet Mask
button.
-or-
Touch the
Default Gateway
option, and then press the
Default Gateway
button.
11.
Use the touchscreen to enter the IP address, subnet mask, or default gateway, and then touch the
Save
button.
ENWW
Network configuration
81