Management menu – HP CM3530 User Manual
Page 44
Management menu
Administration
>
Management
Use this menu to set up global product-management options.
NOTE:
Values shown with "(default)" are the factory-default values. Some menu items have no default.
Table 2-9
Management
menu
Menu item
Sub-menu item
Values
Description
Network Address Button
Display
Hide
(default)
Use this feature to display the Network Address button
on the Home screen.
Stored Job Management
Quick Copy Job Storage
Limit
Select the maximum
number of jobs to store
Use this menu to view and manage any jobs that are
stored on the product.
Quick Copy Job Held
Timeout
Off
(default)
1 Hour
4 Hours
1 Day
1 Week
Stored Jobs List Order
Alphabetical
Chronological
Sleep mode
Disable
Use Sleep Delay
(default)
Use this feature to customize the sleep mode settings
for this product.
Select
Use Sleep Delay
to set the product to enter
sleep mode after the delay that is specified in the
Time/
Scheduling
menu.
Manage Supplies
Replace Supplies
Sets the product behavior for when a supply item is low.
The product displays an "Order supplies" message
when a supply item is running low and a "Replace
supplies" message when a supply item has reached its
estimated end of life. To ensure optimal print quality,
HP recommends replacing a supply item when the
"Replace supplies" message is displayed. The supply
does not have to be replaced at this point unless the
print quality is no longer acceptable. Printing beyond
this point is possible using
Override at out 1
or
Override
at out 2
. The Override options allow the product to
continue using a supply item that has reached its
estimated end of life.
Stop at low
Choose
Stop at low
to stop printing when a supply
reaches a low condition.
Stop at out
(default)
Choose
Stop at out
to stop printing when the estimated
end of life has been reached for a supply. Printing
beyond this point is possible using
Override at out 1
or
Override at out 2
. The supply does not need to be
replaced now unless the print quality is no longer
acceptable.
30
Chapter 2 Control panel
ENWW