Load custom-size paper into tray 3 – HP CM3530 User Manual
Page 117
5.
The control panel shows the tray’s paper type and size. If the configuration is not correct, follow
the instructions on the control panel to change the size or type.
HP LaserJet
DDMMYYYY 00.00 AM
Load custom-size paper into Tray 3
To use custom media, change the size setting on the control panel to
Custom
and set the unit of
measure,
X Dimension
and
Y Dimension
.
1.
Slide open the tray.
2.
Adjust the paper-length and paper-width guides by squeezing the adjustment latches and sliding
the guides to the size of the paper being used.
ENWW
Load paper and print media 103
This manual is related to the following products: