HP CM3530 - Manual (Page 165)

Find the SMTP gateway
1. From the Home screen, touch the Administration menu.
2. Touch the Initial Setup menu.
3. Touch the E-mail Setup menu, and then touch the Find Send Gateways menu.
4. Touch the Find button.
Configure the SMTP gateway address
1. From the Home screen, touch Administration .
2. Touch Initial Setup .
3. Touch E-mail Setup , and then touch SMTP Gateway .
4. Type the SMTP gateway address, either as an IP address or as a fully qualified domain name. If
you do not know the IP address or domain name, contact the network administrator.
5. Touch OK .
Test the SMTP settings
1. From the Home screen, touch Administration .
2. Touch Initial Setup .
3. Touch E-mail Setup , and then touch Test Send Gateways .
If the configuration is correct, Gateways OK appears on the control-panel display.
If the first test was successful, send an e-mail to yourself by using the digital-send feature. If you receive
the e-mail, you have successfully configured the digital-sending feature.
If you do not receive the e-mail, use these actions to resolve issues with the digital-sending software:
● Check the SMTP and address to make sure that you typed them correctly.
● Print a configuration page. Verify that the SMTP gateway address is correct.
● Make sure that the network is operating correctly. Send an e-mail to yourself from a computer. If
you receive the e-mail, the network is operating correctly. If you do not receive the e-mail, contact
your network administrator or Internet service provider (ISP).
● Run the DISCOVER.EXE file. This program attempts to find the gateway. You can download the
file from the HP Web site at
www.hp.com/support/cljcm3530mfp .
ENWW Configure e-mail settings 151