HP 2100 ER - Manual (Page 48)

3-12 Chapter 3
Operating the Fibre Bridge
Making Configuration Changes
Selecting the “Change ALPA Value (option 2 in the previous menu)
produces the following list of addresses:
Figure 3-6 Fibre Channel Addresses
4. Select an address by entering the number before the colon.
Pressing any key, except a valid number, will display an invalid entry
message. The address will not be changed. The firmware will return
to the Fibre Channel Configuration menu.
NOTE Confirm that the Fibre Channel device address selected is unique on the
FC-AL.