HP 2100 ER - Manual (Page 27)

Chapter 2 2-3
Setting Up the Fibre Bridge
Mounting the Fibre Bridge in a Rack
S
e
tti
ng Up
th
e
F
ibr
e B
ridg
e
Mounting the Fibre Bridge in a Rack
Mounting the Fibre Bridge in a rack requires assembling L-brackets to
the Fibre Bridge and then mounting the L-brackets to a rack. L-brackets
allow the Fibre Bridge to be mounted in a fixed position, near the back of
a rack.
NOTE All connections and user displays are located on the back of the Fibre
Bridge. Consequently, mount toward the back of a rack.
Before you begin, verify you have the assembly components listed in
Table 2-1.
Table 2-1 Assembly Components
Tool 1 #2 Phillips screwdriver (not supplied).
Mounting
brackets 1 pair L-brackets, for assembly with Fibre
Bridge.
Rackmount
screws and
nuts 1 package
(Includes
extra
parts) Six (6) 6x32 screws to attach Fibre Bridge
to L-brackets.
Six (6) 10x32 screws and six (6) clip nuts
for installing the Fibre Bridge (with
L-brackets attached) into a rack.
Filler panel
decal 1 Decal for filler panel, provided by
customer (supplied separately by rack
manufacturer).