HP 2100 ER - Manual (Page 31)

Chapter 2 2-7
Setting Up the Fibre Bridge
Installing Cables
S
e
tti
ng Up
th
e
F
ibr
e B
ridg
e
3. Connect one end of the optical cable into the GBIC on the Fibre
Bridge and the other end into the GBIC on the Fibre Channel HBA in
the host.
4. Connect the power cord from the Fibre Bridge to an grounded outlet.
5. Confirm that all cable ends are connected securely and both ends of
the SCSI bus are properly terminated, as shown in Figure 2-3 on page
2-7.
6. Go to “Powering on the System” in Chapter 3.
Figure 2-3 Fibre Bridge Connection, Basic Configuration
(DLT and MO Libraries)