HP CM6049F MFP - Manual (Page 47)

Menu item Sub-menu item Sub-menu item Values and Description
Primary DNS Use this item to specify an IPv6 address for a primary
DNS server that the print server should use.
Secondary DNS Use this item to specify an IPv6 address for a
secondary DNS server that the print server should use.
Proxy Server Specifies the proxy server to be used by embedded
applications in the device. A proxy server is typically
used by network clients for Internet access. It caches
Web pages, and provides a degree of Internet security,
for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you may need to contact your
Independent Service Provider (ISP) for the proxy
server address.
Proxy Port Type the port number used by the proxy server for
client support. The port number identifies the port
reserved for proxy activity on your network, and can be
a value from 0 to 65535.
IPX/SPX Enable Off : Disable the IPX/SPX protocol.
On (default): Enable the IPX/SPX protocol.
Frame Type Selects the frame-type setting for your network.
Auto : Automatically sets and limits the frame type to
the first one detected.
EN_8023 , EN_II , EN_8022 , and EN_SNAP : Frame-
type selections for Ethernet networks.
AppleTalk Enable Off : Disable the AppleTalk protocol.
On (default): Enable the AppleTalk protocol.
DLC/LLC Enable Off : Disable the DLC/LLC protocol.
On (default): Enable the DLC/LLC protocol.
Table 2-11 Jetdirect menus (continued)
ENWW Initial Setup menu 31