Set the default gateway, Configure tcp/ipv6 parameters – HP CM6049F MFP User Manual
Page 107
6.
Touch
IPV4 Settings
.
7.
Touch
Config Method
.
8.
Touch
Manual
.
9.
Touch
Save
.
10.
Touch
Manual Settings
.
11.
Touch
Subnet Mask
.
12.
Touch the Subnet Mask text box.
13.
Use the touchscreen keypad to type the subnet mask.
14.
Touch
OK
.
15.
Touch
Save
.
Set the default gateway
1.
Scroll to and touch
Administration
.
2.
Scroll to and touch
Initial Setup
.
3.
Touch
Networking and I/O
.
4.
Touch
Embedded Jetdirect
.
5.
Touch
TCP/IP
.
6.
Touch
IPV4 Settings
.
7.
Touch
Config Method
.
8.
Touch
Manual
.
9.
Touch
Save
.
10.
Touch
Manual Settings
.
11.
Touch
Default Gateway
.
12.
Touch the Default Gateway text box.
13.
Use the touchscreen keyboard to type the default gateway.
14.
Touch
OK
.
15.
Touch
Save
.
Configure TCP/IPv6 parameters
For information about configuring the device for a TCP/IPv6 network, see the HP Jetdirect Print Servers
Administrator's Guide.
ENWW
Configuring network settings
91