HP rx3000 Series - Manual (Page 44)

Synchronizing with Your Computer
User’s Guide 3–4
b. Click the Schedule tab to set the time for
synchronization.
c. Click the Rules tab to determine how conflicts between
information on your HP iPAQ and information on your
computer are to be handled.
3. Tap OK.
4. From the File menu, click Connection Settings... . Select the
type of connection to use between the HP iPAQ and the
computer.
Using the Serial Infrared (IR) Connection
Your HP iPAQ has an infrared port. If your computer has an
infrared port or an infrared USB adapter, you can synchronize
your HP iPAQ and your computer using an infrared connection
instead of the sync cable. The infrared connection option only
works on computers with Microsoft Windows 98SE, Me, 2000, or
XP operating systems.
To set up an infrared connection to your computer:
1. Follow your computer manufacturer’s instructions to set up
the infrared port.
2. Line up the HP iPAQ infrared port with the computer infrared
port so they are unobstructed and within 12 inches (30 cm) of
each other.
3. On your HP iPAQ, tap Start > ActiveSync > Tools >
Connect via IR... . Synchronization begins automatically.
4. To disconnect, move the HP iPAQ and computer away from
each other, or tap the X in the upper right corner of the screen
on your device.