HP rx3000 Series - Manual (Page 274)

Expansion Cards
User’s Guide 11–3
Removing Secure Digital (SD) or
MultiMedia (MMC) Expansion Cards
To remove an SD or MMC card from the expansion slot on the
HP iPAQ:
1. Close all applications that are using the expansion card.
2. Remove a card from the Secure Digital expansion slot by
slightly pushing down on the card 1 to unlock it.
3. When the card disengages and pops up 2, pull it from the
expansion slot.
Ä CAUTION: SD cards must first be unlocked before removal. Do not try
to pull a locked SD card out of the expansion slot. Be sure to unlock the
SD card before removal. Failure to do so may damage the expansion
slot.