HP rx3000 Series - Manual (Page 285)

Troubleshooting
User’s Guide 12–10
iPAQ Mobile Media
For more information on iPAQ Mobile Media, refer to Chapter 6,
“Getting to Know iPAQ Mobile Media.”
I cannot connect
to an available
network that
shows in the list of
networks without a
name. It is likely that the network is a “hidden” or non-SSID broadcast
network. You must know the network name (SSID) to be able to
connect.
1. Tap Start > Settings > Connections tab > Connections
> Advanced tab > Network Card.
2. Select Add New Settings.
3. Enter the network name (SSID).
4. Select the appropriate values in the Connects to: box.
5. If WEP settings are required, tap the Authentication tab
and enter them.
I cannot connect
reliably to an
available network
or connections
are frequently
dropped. • Be sure there is ample signal strength available in the
area.
• If you are using one of the WLAN Power Save modes, try
changing modes or turning off Power Save. Refer to
Chapter 10, “Managing the Battery” for more information.
• If you are using Extended Power Save mode, turn off
Bluetooth.
Problem Solution (Continued)