Of cylinders, Number, He ads – Epson EQUITY 3865X/20 PLUS User Manual
Page 57: Save settings
The information for Number
of cylinders
is
automatically updated on the submenu above and you see
the next parameter,
Number
of
he ads.
Enter the
correct number of read/write heads for the hard disk and
press
Enter.
Follow this same procedure for each remaining item in the
settings list (the number of sectors, the precompensation
cylinder, and the landing zone).
If you enter a parameter incorrectly, press or to
highlight the parameter and then enter it again.
The Setup program does not allow you to enter the total
storage capacity; it calculates the storage capacity for you
based on what you enter for the number of cylinders, heads,
and sectors.
After you type the landing zone number and press
Enter,
the cursor block returns to the Drive submenu heading.
8.
If you want to change the hard disk type for another drive,
press
or
and return to step 4.
9.
When the hard disk drive settings are correct, press to
move the cursor block into the top submenu. Highlight
** SAVE SETTINGS
* * and press
Enter
to save your
hard disk drive configuration.
2-22
Running the Setup Program