Epson EQUITY 3865X/20 PLUS - Manual (Page 43)

If you have a composite color monitor, such as a color
television with a video input, try selecting
CGA 80
Column. If the resulting resolution is poor, run Setup
again and select CGA 40 column.
If you have a monochrome display adapter (MDA), an
MGA, or a Hercules MGA attached to a monochrome
monitor, choose Monochrome
80 column.
(Also set the color/mono switch on the MGA card to
mono.)
If you have any other combination of monitor and
display adapter card, select EGA, MCGA, VGA or
other. In addition, consult the documentation
supplied with your display adapter card.
If you are using IBM 3270 emulation software or
Banyan 386 network software, select
Remap
VGABIOS at C000. To remap the VGA BIOS
back to E000, rerun Setup and select EGA, MCGA,
VGA or other.
Note
If you have two display adapters of different types, select
the setting for the one you want to be your primary
display adapter. The other one is your secondary adapter.
A message appears at power-on telling you whether you
are currently using your primary or secondary adapter.
4. After you highlight the appropriate display adapter type,
press Enter. The screen displays your new setting.
5. Highlight *** SAVE SETTING *** and press Enter
to return to the main Setup menu.
2-8 Running the Setup Program