Epson EQUITY 3865X/20 PLUS - Manual (Page 39)

Continuing From an Error Message
If your computer has never been set up, you may see an error
message and prompt(s), such as the following:
1 6 2 - System options not set
(Run SETUP in REFERENCE DISK)
(Resume = "F1" key)
If you see an error message like this one, follow these steps:
1. Press F1. The computer beeps and the screen displays an
error message and prompt, such as the following:
Error(s) detected
Incorrect configuration
Set default value ? ( Y / N )
The error message beside the diamond indicates the
condition causing the error. There may be more than one
error listed in the message. Here are some of the error
messages you may see:
Time is invalid
HDD and/or HDC failed initialization
Memory size is incorrect, correction made
Cacheable range is adjusted
Incorrect configuration
Checksum is incorrect
HDD is incorrect
Some errors, such as Time is invalid, do not allow
you to set a default value, so the screen does not display the
Set default value prompt. If you see one of these
errors, press E SC ; the screen displays the main Setup menu
so you can enter a new setting.
2-4 Running the Setup Program