Epson EQUITY 3865X/20 PLUS - Manual (Page 50)

Note
If you are using the keyboard that came with your computer
(or another IBM AT compatible keyboard), the default for
the initial num lock setting is
ON. If you are using a keyboard
that has 83 or 84 keys, the initial num lock default setting is
OFF.
The keyboard repeat rate option lets you change the speed at
which your keyboard repeats a character when you hold down a
key. The default setting is
Normal, but you can make the rate
faster or slower.
Follow these steps to check or change the speaker and keyboard
options:
1.
2.
3.
4.
At the main Setup menu, highlight Keyboard/Sound.
The current settings appear:
Speaker Enabled
Initial num lock ON
KB repeat rate Normal
If the displayed settings are appropriate for you, skip this
section.
To change any of the settings, press Enter. The cursor block
moves into the submenu and the Speaker option is
highlighted.
To enable or disable the speaker (turn it on or off), press
Enter.
To turn the initial num lock setting on or off, highlight
Initial num lock and press Enter.
Running the Setup Program 2-15