Connecting the mouse – Epson EQUITY 3865X/20 PLUS User Manual
Page 30
2.
You can raise the keyboard by adjusting the legs on the
bottom. To change the angle of the keyboard, turn it over
and flip each leg upward until it locks into place, as shown
below.
6
Connecting the Mouse
Your computer has an auxiliary port for an IBM PS/2 compatible
mouse that uses a miniature DIN (6-pin) connector. If you have
purchased a mouse with this type of connector (or adapter), you
can connect it to the built-in port on your computer.
If you purchased a mouse with a serial connector, you can
connect it to the built-in serial port on your computer.
If you have another kind of mouse that requires a different
interface port, you need to install an option card to provide the
interface.
To connect a mouse to the built-in mouse port, hold the mouse
plug so it is oriented properly with the computer socket. Insert
the plug into the appropriate socket, marked with a mouse icon,
as shown in the following illustration.
Setting Up Your System
1-13