Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 72)

72
Projection Procedure
Step 4 Select an Aspect Ratio (Screen Aspect)
Matching the Screen
Select an optimum screen mode (aspect) according to the aspect ratio of the
screen, type of input image signal and so on for the projection to make best use of
the screen size.
Select the Aspect
Select [Aspect] based on the input signal type, aspect ratio of the screen and
resolution.
Types of Aspect Ratios
■ Auto
An image is projected as large as possible at the aspect ratio of the input signal.
Select this mode for normal image projection.
■ True size
The image is projected with the original resolution of the input signal. Screens of
computers with a lower display resolution than the projector are displayed smaller
but clearer than in other aspect ratios.
Selecting an Aspect Ratio
Press the ASPECT button on the remote control and select an appropriate aspect
ratio. Press the ASPECT button to change the aspect ratio type.
You can also select any aspect ratio from [Aspect] in the menu. ( P96 )
There may be some cases when this cannot be selected, depending on the input signal
and/or resolution.
Example: Remote control