Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector User Manual

Page 46

Installation Procedure

Hook the Base bracket to the
Joint fitting and secure it
temporarily

Hook the Base bracket on the
protrusion (D) of the Joint fitting,
and secure it temporarily using the
four supplied M5 screws (B).

•

Pull out the cables.

•

Be sure to secure screws (B)
tightly after making the
adjustment discussed in “Adjust
the Projection Angle” (

Put the cables in to the pipe and
attach the covers

Thread any cables that are too
thick for the ceiling-mount bracket
hole through a separate hole you
have opened.
1 Pull the cables out of the cable

hole in the ceiling.

2 Put the cables inside the pipe.
3 Close the inner cover of the pipe

and then close outer cover of the
pipe.
Secure to the extension pipe
using the supplied M3 screw.

4 Connect the cables to the

projector.