Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 70)

70
Projection Procedure
■ Adjusting the Image Position
To adjust the screen position up, down, left, or right, press the SHIFT button on the
remote control or the LENS button on the projector. It can change the projected
screen to the most suitable position by moving the position of the lens up/down/left/
right. (
P50 )
1
Press the SHIFT button on the remote control to display the lens shift
adjustment window.
Press the LENS button on the projector repeatedly to switch between windows
for parameters adjusted by controlling the lens.
To access the lens shift adjustment window, press the
LENS button three times
(or four times if you have set [Marginal focus] to [On]).
Remote control
When [Marginal focus]
is set to [On].
When [Marginal
focus] is set to [Off].
Projector
Press three times.