Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 117)

117
Menu Settings
Ad
va
nc
ed
G
u
ide
Me
nu
Se
tt
ing
s
Iris
> [Install settings] > [Iris]
Use this feature for projection emphasizing contrast over brightness.
Test pattern
> [Install settings] > [Test pattern]
You can project a test pattern ( P176 ) to check resolution, color, and other details
even without supplying an input signal. Also available by pressing the TEST
PATTERN button on the remote control.
Submenu Function
Open Disables aperture adjustment.
Close 1-3 Specify the aperture value in a range of 1-3.
The [Iris] setting does not affect power consumption.
Option Function
Off Disable test pattern display.
On Enable test pattern display.
• While the test pattern menu is displayed, you can use the [ ] / [ ] buttons to switch
patterns. Additionally, options of test pattern that have options can be changed with the
[ ] / [ ] buttons.
• The test pattern menu is no longer displayed after a little while, but you can view it
again by pressing the [ ] / [ ] buttons.