Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 19)

19
Before Inst
allat
ion
Before Installation
Precautions When Carrying/Shipping the
Projector
Precautions for Installation
Be sure to read “Safety Instructions” and “For Safe Use” ( P5 – P18 ). Also
take the following precautions during installation.
■ Do Not Use in the Following Environments
Note the following precautions when carrying or shipping the projector.
• Disconnect the cables connected to the projector. Carrying the
projector with the cables attached may cause an accident.
• Retract the adjustable feet. Leaving the feet extended when the
projector is moved may cause damage.
• Do not carry or move the projector alone. Have at least one
assistant.
• Do not strike the projector or subject it to impact. Doing so may
cause a malfunction.
• Do not install the projector so that it is inclined or standing
vertically. The projector may be damaged if it tips over.
• Locations with excessive humidity, dust, oily smoke or tobacco
smoke
Adhesion to the lens, mirrors or other optical parts may reduce image
quality.
• Near high-voltage power lines or sources of electrical power
This may cause malfunction.
• On soft surfaces such as carpets or cushioned mats
Heat may build up inside the projector and damage it.
• Locations with excessive temperature or humidity
This may damage the projector. Acceptable ranges for operating and
storage temperature and humidity are as follows.
Operating temperature Operating humidity Storage temperature
0°C (32°F) – 40°C (104°F) Up to 85% -20°C (-4°F) – 60°C (140°F)