Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 147)

147
Using the Projector on a Network
Ad
va
nc
ed
G
uid
e
Using
the
Pr
oje
ctor
on a Networ
k
Setting Basic Information [Network]
From [Network] in the settings screen, you can log into the web screen and set
basic network information. For the setting procedure, refer to “Network Setting”
(
P144 ).
Confirm new password For confirmation, enter the same
password that you entered in [New
password]. system
Item Explanation Factory default setting
MAC address Shows the projector’s MAC address. The MAC address of the
projector
DHCP Select whether to turn the DHCP
function on or off. If the function is on,
because the IP address is acquired
from the server, it is not possible to
enter the following items.
[IP address]
[Subnet mask]
[Default gateway] OFF
IP address Enter the IP address of the projector in
1-byte numbers. 192.168.254.254
Subnet mask Enter the subnet mask in 1-byte
numbers. 255.255.255.0
Default gateway Enter the default gateway IP address in
1-byte numbers. 0.0.0.0
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Item Explanation Factory default setting