Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 114)

Menu Settings
114
Submenu Function
Side
Color blending
adjustment
Adjust unwanted colors or discrepancies between colors in the blending
area.
Submenu Function
Left
Select the direction of the blending area to adjust.
Right
Top
Bottom
Width
Specify the width between the start and end markers.
Start
position
Moves the position of the start marker.
• Large blending areas may cover input signal
dialog boxes and other interface elements.
In this case, momentarily set edge blending
to [Off] and check the display.
• Although the starting marker is normally
aligned with the image edge, it can also be
aligned toward the center of the image. In
this case, the black blending area will lie
outside of the starting marker.
Submenu Function
Off Do not adjust colors of blended images.
Adjust
Adjust unwanted colors or discrepancies between
colors in the blending area.
Option Function
White
Simultaneously adjust red,
green, and blue to correct
unwanted colors or
discrepancies in the blending
area.
Red/Green/Blue
Individually adjust red, green,
and blue to correct unwanted
colors or discrepancies in the
blending area.